Safety Precautions; User Precautions; Conditions Of Use - BH TECNOVITA Milan M900 Instructions De Montage Et Utilisation

Thank you for purchasing this product. Carefully read through these OPERATING INSTRUCTIONS and pay attention to
all of the precautions in order to avoid using the product incorrectly.
Keep this manual in a safe place for future reference.

SAFETY PRECAUTIONS

Before use, carefully read through the safety instructions and use them correctly.
Follow the safety instructions to avoid injury or damage to the product.
For safety purposes to avoid potential damage and misuse of the product, pay strict attention to the instructions
strictly marked as follows:
WARNING
Applicable environments
•
WARNING

User precautions

•
Consult your doctor before beginning to use this appliance. This advice is especially important for those
suffering from health problems.

Conditions of use

To prevent possible injury or incorrect results do not use the machine in conjunction with other medical appliances
or electric blankets.
► To avoid nauseous effects do not use for up to half an hour after eating.
► To prevent injury, do not allow children or household pets to get too near to the machine, backrest, seat or
under the leg rest.
► To prevent damage or injury do not place heavy objects on top of the machine in case they fall off.
► A massage session lasting longer than 5 minutes in a fixed body position may cause over stimulation and
negative effects.
► The chair is not to be used by more than one person at a time.
► The chair is designed to be used by people weighing less than 120 kg.
Improper use can cause serious injury to the user or damage the appliance.
To avoid electric shock or injury do not use the chair in a bathroom or damp
surroundings
To avoid the risk of fire, do not use the product on or near heating appliances or expose
it to direct sun light. Do not use at temperatures above 40ºC.
To avoid the risk of fire, do not use the chair on electrically heated mats or other types of
heaters.
Make sure the chair is placed on a flat surface.
When changing from cold to hot temperatures, wait one hour to prevent the machine
suffering from frost damage.
English
19