Movement And Relocation - BH TECNOVITA Milan M900 Instructions De Montage Et Utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

Movement and relocation

The assistance of a second person is advisable.
Use both hands to lift the front of the footrest, tilting the chair back on the
two wheels, as shown in the diagram.
surfaces; the chair is heavy so be very careful when moving it.
To prevent it from toppling over make sure there is nothing or nobody on
the chair when moving it.
CONTROL PANEL FUNCTIONS.
KEYS AND BUTTONS.-
1.-
Start/Stop.
Start/Stop control key.
The chair is in the standby position.
Press this key once and the backlight on the control
panel will begin to flash, inclining the backrest to 60º
and legrest.
Press any massage function key to start the chair's
massage functions.
Press the control button again to stop all of the
massage functions and the massage rollers will
return to their original position. Wait a few seconds
before restarting.
After 4 minutes the control panel will switch to
standby mode. To reactivate the monitor press the
key on the control panel.
2/3.-
Recline/Raise backrest and
legrest.
Control keys to adjust the angle of the backrest and
the massage chair's legrest support.
These two control keys can be used to adjust the
recline and elevation angle of the backrest and
legrest together.
Move the unit over smooth
Press the key once to move the backrest and legrest
into a comfortable position.
Press the key again to stop adjusting the backrest up
and legrest lift functions.
4/5.-
Legrest angle adjust keys.
These two control keys can be used to adjust the
massage angle of the legrest.
Press the key once to move the legrest into a
comfortable position.
Press the key again to stop adjusting the legrest lift
functions.
6/7.-
These two keys are used to adjust the length of the
footrest.
Press the key once to set the footrest to a
comfortable length.
Press the key again to stop adjusting the length.
Points to remember:
When retracting the leg rest, it will stop in the most
comfortable position based on the auto-detection
sensor, simply by pushing the leg rest gently when it
reaches your feet.
26
Legrest lift/incline keys.
Footrest length adjustment key.

Publicité

Table des Matières
loading

Table des Matières