Dogtra EDGE RT Manuel Du Propriétaire page 7

2. Transmitter Button Function
The handheld transmitter uses 4 buttons to send
stimulation. The LED indicator will blink on both
the handheld transmitter and the receiver when the
stimulation buttons are pressed.
Medium Nick
Stimulation
High Nick Stimulation
Low Nick Stimulation
1) Constant Stimulation
The two orange buttons on the front of the transmitter
control 3 levels of Constant stimulation. Pressing the
Constant button gives continuous stimulation as long as
the button is pressed, for up to 12 seconds. If the button
is not released after 12 seconds, the stimulation will
automatically turn off as a safety feature. The receiver
will be ready to be reactivated once the button has been
released.
- Low Constant Stimulation: Press the lower orange
button for a low power Constant stimulation.
- Medium Constant Stimulation: Press the top orange
button for a medium power Constant stimulation.
- High Constant Stimulation: Press both orange buttons
together for a high power Constant stimulation.
10
Medium Constant
Stimulation
High Constant Stimulation
Low Constant
Stimulation
2) Nick Stimulation
The two black buttons on the front of the transmitter
control 3 levels of Nick stimulation. When the Nick button
is pressed, the receiver emits a single rapid pulse of
electrical stimulation.
- Low Nick Stimulation: Press the lower black button for a
low power Nick stimulation.
- Medium Nick Stimulation: Press the top black button for
a medium power Nick stimulation.
- High Nick Stimulation: Press both black buttons
together for a high power Nick stimulation.
3) Pager Button
The Pager button is located on the back of the transmitter.
Pressing it will give a vibration for as long as the button is
pressed, for up to 12 seconds.
11