Duronic STM11 Manuel D'utilisation page 8

• Remove all of the packaging materials. Check that there are no parts missing.
• Assemble the steam mop following the steps below.
IMPORTANT:
• This steam mop operates by emitting steam at an increased
temperature of 120°C.
• Always test on an inconspicuous area of the floor first.
• Never use it on flooring which cannot resist this temperature, or on
floorings with coatings, polishes, or that are plastic or antique.
• If in any doubt, please check carefully on a part of the floor surface
where minor marks will not matter.
IMPORTANT:
• Only use deionised or distilled water in this steam mop.
• Do not use tap water, detergents, disinfectants, scented oils, cleaning
solutions, bleach, vinegar or scented water in your steam mop. They
will cause damage to your product and void your warranty.
1. Place the pole(A) between the handle parts(B+C).
Before First Use
How to Assemble the Mop
A
8
B
C