Télécharger Imprimer la page

Duronic STM11 Manuel D'utilisation page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
operating.
Always turn off the steam mop before unplugging from the outlet.
Unplug from the mains plug outlet when not in use.
Never disconnect the plug by pulling on the power cable. You should always
hold the plug with your hand and pull to disconnect.
To protect against the risk of electric shock, do not immerse any part of steam
mop in water or other liquids.
The appliance is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
The appliance should not be left unattended while connected to the mains
power.
Do not use the steam mop for anything other than cleaning floors.
Do not use tap water, synthetic solutions, scale removers, fragrances, soaps,
chemicals, or any other foreign bodies to the water tank.
Ensure that there is no foreign matter blocking the steam outlet.
When the mop cleaning head is used, the temperature output is higher. Do
not put your hands o feet under the mop head to avoid scalding.
Always test the mop on an inconspicuous area first. Never use on materials
that can not resist high temperature, such as dralon, natural fur etc.
To avoid deformation, do not use the steam mop on a just-polished waxed
wood floor. A flooring like this, made of special material or that requires
specific cleaning via a specific method, should no be steam cleaned using
this mop.
Do not use on unsealed wooden or hard flooring.
Don't use the steam mop in one place or the same place over and over again.
Depending on the type of material the floor is made of, it may deform or fade.
Safety Information (Continued)
6

Publicité

loading

Produits Connexes pour Duronic STM11