Texinov FLUXMEDICARE V2 Manuel D'utilisation page 45

• Insert the harness buckle at a slant in the intermediate unit slot.
• Slide the harness Velcro into the intermediate unit slot. Then insert
the Velcro into the buckle and attach it to the adherent part.
• Check the intermediate unit is correctly attached.
Connect the count key supplied with the TEXTLIGHT1-V2 luminous bands
in its slot on the top of the installed intermediate unit.
This must remain connected throughout the treatment.
Insert the metal end (connector) of the TEXTLIGHT1-V2 luminous bands
into the slot in the intermediate unit (check that the protective cap has
been removed beforehand).
Reposition the textile part on top of the connect to protect it from light
emission during the treatment.
The patient is ready to be treated.
User Manual for the FLUXMEDICARE® V2 System - IFU-FLUXMEDV2 - V.1.1 – 03/2021 Page 45 / 84