Télécharger Imprimer la page

PELOTON 00097-1.1 Guide page 5

Publicité

Les langues disponibles

Les langues disponibles

ENGLIS H
6. Insert the left pedal into the left crank arm at a 90° angle. Holding
the pedal steady, rotate the spindle at least four full rotations
counterclockwise. Tighten using a 15 mm pedal wrench. Double
check that the pedal is as tight as you can make it.
Tighten pedals regularly. Remember to turn the wrench toward
the front of the bike to tighten on both sides.
To ensure safe operation and optimal performance, replace the
pedals on your Peloton Commercial Bike or Bike+ every 12 months.
U S I N G TO E C AG E S
C AU TI O N: Never use the toe cages without the strap. If a
strap is missing, remove the pedal from use until it can be
replaced.
1. Thread the toe cage strap up into the buckle and out through
the other side. Make sure the straps on both toe cages are
threaded through the buckles and there is enough room in the
cages for your shoes to slide in easily.
5

Publicité

loading

Produits Connexes pour PELOTON 00097-1.1