Publicité
Les langues disponibles
Les langues disponibles
Instructions for use
GB
SUPPORT BASE ASSEMBLY INSTRUCTIONS.
Before performing any assembly operation, make certain that the
appliance is switched off and disconnected from the power outlet. Pass
the power cord through the central hole so that it slides through the
special space and is fixed in the cord slot underneath the base.
Screw on the screws with plastic heads to fix the heating body to the
base, tightening them correctly.
USER INSTRUCTIONS.
To turn on the appliance, insert the plug into the power outlet and press
the orange "ON" pushbutton.
When the appliance turns on, only the central lamp will come on. If
you wish to increase the heating power of the appliance, just press the
independent "400W" buttons to turn on the other two halogen lamps.
To activate the oscillating function, press the "TURN" button. The size of
the oscillation angle is fixed.
You can change the heating direction by manually rotating the body of
the appliance while holding the support base stationary.
The appliance is equipped with an automatic turn-off system in case it
falls over accidentally.
Before connecting or disconnecting the appliance, make certain that all
the switches are in the off position.
Before replacing the appliance in its packaging, check that it has cooled
sufficiently.
Maintenance
GB
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
15
Publicité
