Publicité
1
1
3
Operating Instructions
(for U.S.A. and Canada only):
The symbol "O" of a switch indicates the "off"
position of the switch.
For an appliance with a polarized plug (one blade
wider than the other):
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in
any way.
The foot controller Model YC-482J or YC-482J-EC
is used with this sewing machine
10
5
3
4
2
1
6
1
Connecting the Machine to the Power Supply
Before connecting the machine to the power supply,
make sure the voltage and frequency shown on the
machine conform to your electrical power.
1. Turn off the power switch, and connect the
2
machine plug to the machine socket.
2. Connect the power supply plug to your power
supply.
3. Turn on the power switch.
1
Power switch
2
Machine plug
3
Machine socket
4
Power supply plug
5
Power supply
6
Speed controller
Controlling Sewing Speed
Sewing speed can be varied by the speed controller.
The harder you press on the controller, the faster the
machine runs.
Step on the speed controller with the presser foot
lifter up, and practice controlling the speed.
1
Speed controller
For Your Safety:
*
While in operation, always keep your eye on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, loopers,
handwheel, needle or knives.
*
Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
*
Do not place anything on the foot control, otherwise
the machine will start inadvertently.
Publicité
