Amica UKS 16158 Notice D'utilisation page 60

frame of the kitchen unit. Adjust the position of the refrigerator mak-
ing a 6mm space between inside wall of the kitchen unit and external
sides of the refrigerators. Fix the brackets to the horizontal frame of
the kitchen unit with screws. Insert the seal in the aperture (approx.
10mm) between the lower front frame and bottom board of the kitch-
en. Fix lower brackets (3) to the lower front frame with screws (2). Fix
the lower brackets to the bottom board of the kitchen unit with screws
(2). Properly insert seals in the apertures on the left, upper and right
sides of the refrigerator.
REVERSE THE FREEZER
COMPARTMENT DOOR
Reverse the freezer compartment door (Fig. 21).
1. Unscrew the door hinge and remove it. When removing the hinge,
hold the door and set it aside (fig. 21, item 2).
2. Remove the screw securing the door stop. Remove the door hinge
screw hole plugs (Fig. 21, Item 3).
3. Transfer the door stop to the opposite side of the compartment and
tighten the screw. Also replace the hinge screw hole plugs (figure
21, item 4).
4. Reverse the door by 180° and install on the opposite side.
5. Install and tighten the screw of the bottom hinge that supports the
door on the opposite side (Fig. 21, item 5).
6. When installed, open and close the door to ensure it operates
smoothly.
- 60 -