Teac LP-R450 Mode D'emploi page 20

Up to 32 tracks can be programmed in the desired order.
< Insert a disc and select "CD" before beginning programming.
< Shuffle playback does not work during programmed playback.
< Programmed playback works with finalized discs only.
1 Press the PROGRAM button in the stop mode.
"PROGRAM" indicator and "P" blink on the display.
2
Press the . or / button to select a track.
track number
20
Programmed Playback
3 Press the PROGRAM button.
The track is programmed, and "P" stops blinking. If you select
another track, "P" starts blinking again.
Repeat steps
< To select the same track consecutively, press the PROGRAM
button again.
< You can program up to 32 tracks.
< To cancel the program mode, press the STOP button (H).
< You cannot select the track which does not exist in the disc.
4 When the selection of track numbers has been finished,
press the PLAY/PAUSE button (y/J) to start program
playback.
"PROGRAM" indicator stops blinking.
To check the programmed order
In the stop mode, press the . or / button repeatedly to
show the track numbers that have been stored in memory.
To erase a track, press the CLEAR button when the number is
displayed. After deletion, the next track number will be moved
up.
2 3
and to program more tracks.