Teac LP-R450 Mode D'emploi page 16

< Before use, completely loosen the transportation screw by
turning it clockwise with a coin and remove the stylus guard.
1 Press the PHONO/TAPE/AUX button once or twice to select
PHONO.
2
Gently open the dust cover.
< When opening the cover, pay attention to prevent your hand
from getting caught.
3
Put the record on the turntable.
When playing a 45 RPM large hole single record, use the included
adaptor.
16
Listening to a Record
adaptor
4
Select the speed.
5
Gently push the clamper to the right to release the tone
arm.
6 Raise the cue lever to lift the tone arm off the tone arm
support.
clamper
tone arm
transportation screw
cue lever