Technical Specifications - LAVAZZA MilkEasy Mode D'emploi

Problem encountered Possible causes
Milk leaking from the
milk frother.
The milk has not been
heated, it remained
cold.
Too hot or burnt milk.
The milk frother is
noisy.
Cold beverage
preparation failed.
Preparation stops
shortly after starting.
• Nominal Voltage - Power Rating - Power Supply:
See label on the appliance
• Measurements: Height
200 mm 100 mm 100 mm
• Weight: about 0,85 kg
TROUBLESHOOTING
» Excessive milk amount.
» Multifunction button
pressed incorrectly.
» Milk frother damaged.
» Incorrect quantity of
milk.
» Milk frother damaged.
» Components installed
incorrectly.
» Presence of foreign
bodies.
» Multifunction button
operated incorrectly.
» Milk frother damaged.
» Too hot milk frother.
» Warm milk used.
» Milk frother damaged.

TECHNICAL SPECIFICATIONS

Width Depth
33
Solution
» Observe the levels indicated for the
type of preparation.
» Make sure not to keep the
multifunction pressed for 3 seconds.
» Contact Lavazza's Customer Service.
» Make sure you have not used an
amount of milk below the MIN level.
» Contact Lavazza's Customer Service.
» Make sure to have inserted the whisk
correctly.
» Make sure that the lid is properly
fitted into place.
» Make sure the appliance is positioned
on a stable surface.
» Make sure no foreign body is present
inside the milk frother.
» Make sure there are no foreign bodies
between the base and the milk frother
that prevent proper operation.
» Make sure to press and holed pressed
the multifunction button for 3
seconds.
» Contact Lavazza's Customer Service.
» Rinse the glass with cold water and
pour cold milk.
» Do not reuse with milk already heated.
Use cold milk.
» Contact Lavazza's Customer Service.
• Milk container: Max 180 ml
• Housing materials: Thermoplastic
• Cable Length: 0,6 m
EN