LAVAZZA MilkEasy Mode D'emploi page 26

EN
HEAT AND FROTH MILK
Remove the milk frother cover.
Insert the whisk inside the milk frother.
Pour milk into the milk frother in an
amount between the MIN level mark and
the FOAM level mark.
Do not fill the milk frother beyond the
FOAM level (120 ml), otherwise milk
may come out.
For optimal warm milk foam, we recom-
mend using unskimmed milk (pasteur-
ized or UHT), refrigerated (4-8°C). Do
not use milk at room temperature.
Put the cover on the milk frother.
Position the milk frother on the base.
Make sure the lower side of the milk
frother and the base are dry.
MILK FROTHER SETTINGS
26
Press the multifunction button once briefly.
The lid must always be inserted during
operation.
1
CLICK
Do not remove the milk frother from
the base before completing the cycle.
After about 1-2 seconds, the appliance
sounds a brief acoustic signal.
The multifunction button comes on with
white light flashing.
The appliance starts the preparation.
The whisk process stops automatically
when milk is warm enough.
The appliance emits a double beep to in-
dicate the end of the frothing cycle.
The multifunction button turns off.