EN
34
decrease by 1°C. Regular flashing stops after 5 seconds if no button is pressed
and the new set temperature is stored. The LED display returns to show the actual
temperature inside.
DOWN
Press once, the LED display will flash at regular intervals to indicate the current set
temperature. Press again to change the set temperature, press once to decrease
by 1°C. The regular flashing will stop after 5 seconds if no button is pressed and
the new set temperature is stored. The LED display returns to show the actual
temperature inside.
CHILD LOCK
1.
Lock: Press both keys at the same time for 3 seconds to lock.
2.
Unlock: Press both keys at the same time for 3 seconds to unlock
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius by pressing both keys.
Electric push-rod control button
Press this button for a short time, and the button light flashes. At this time, the
push-rod pushes the door open. The push rod will retract automatically after
opening the door and the button light stops flashing.
Attention
1.
The ex-factory temperature of this product is 12 °C, and the corresponding
temperature range needs to be set according to the actual wine.
2.
The cooling temperature can be set from 5 to 20 °C.
3.
Alarm sound: when a system malfunctions occurs and the alarm sounds, press
any key on the control panel to cancel the alarm sound.