Buffalo FB865 Mode D'emploi page 13

11. Programming Mode
This mode allows the user to set cook time and power level to the preset programs of the number
buttons.
1. Open the door. Then press the number button "1" for 5 seconds. The buzzer will sound once and
enter Programming Mode.
2. "PROGRAM" is shown.
3. Press a desired number button to set the program. 2 seconds later, the preset time associated with
that number button will be shown.
4. Now you can press the number buttons to set the desired cooking time.
5. Press button. The display will show "%POWER". Now press number buttons to set the power
level, and the corresponding power level will be shown. If to set the full power level, just press "1"
and "0" successively. Then the display will show "100%POWER". If no power chosen, 100% power
will be the default.
6. After setting cooking time and power, press
• Note: If all the cooking time exceeds the maximum time allowed by User Option 7, when pressing
to save the program, the buzzer will sound 3 times to indicate the time is not valid. Then the
display will turn back to show "PROGRAM". The time set before will have no change.
7. Close the door, the oven will turn back to Ready Mode.
• Note: If pressing
saved will be lost. If there is program saved as memory program, pressing the related number button
will start the saved program. If no program saved, the buzzer will alarm when pressing number
buttons and thus it will not work.
For example, if desired to set a program as memory program, with power level 70% and cooking time
of 1 minute and 25 seconds, please follow below operations:
Step1: Open the door. Then press number button "1" for 5 seconds, "PROGRAM" is shown.
Step2: Press the number button, e.g. "3", the display will show "P003". After 2 seconds, the preset
cooking time " :30" is shown.
Step3: Press number buttons "1", "2" and "5" to set the cooking time.
Step4:
Press
The display will show "1:25 70". Setting is now finished.
Step5:
Press to save. "PROGRAM" is shown again. When to use the program next time, just
press the number button "3", the related program will start automatically.
Note:
• If power supply is cut off, the saved program will not be lost.
• If the program needs to reset , just repeat the above steps.
• If pressing at the last step, it will return to Door Open Mode. All settings will not be saved.
FB865_FE143-E_ML_A5_v3_20240703.indb 13 FB865_FE143-E_ML_A5_v3_20240703.indb 13
during setting, the oven will turn to Door Open Mode. The program that is not
button first. Then press "7" to set power level 70%.
to save. When saved, "PROGRAM" is shown.
EN
13
2024/7/3 13:35 2024/7/3 13:35