VONROC LB503DC Traduction De La Notice Originale page 9

Checking the battery charging status (Fig. D)
• To check the battery charge status, push the
button (6) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more char-
ge the battery has left.
• When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
Charging the battery with the charger (Fig. D)
1. Take the battery (2) from the machine.
2. Turn the battery (2) to upside down position and
slide it onto the charger (8) as shown in Fig. D.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet and
wait for a while. The LED indicators on the charger
(8) will lighten up and show the charger status.
The charger has 2 LED indicators (9) which indica­
te the status of the charging process:
Red LED Status Green LED status
Off Off
Off On
On Off
• Fully charging the 2Ah battery may take up to
60 minutes.
• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Assembling the tubes (Fig. B)
Always remove the battery before mounting
an accessory.
WWW.VONROC.COM
• Slide the upper tube (4) onto the motor housing
until it clicks into place.
• Slide the lower tube (5) onto the upper tube (4)
until it clicks into place.
4. OPERATION
Switching the machine on (Fig. A)
To switch on the leaf blower, press the On/Off
switch (1) to the "On" position.
Switching the machine off (Fig. A)
Move the On/Off switch (1) to the "Off" position.
5. MAINTENANCE
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
Charger status
ventilation openings are free of dust and dirt. Re-
No power
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
Standby mode:
as gasoline, alcohol, ammonia, etc. Chemicals such
- No battery is
as these will damage the synthetic components.
inserted or,
- Battery inserted
ENVIRONMENT
but charging has
finished
Battery charging in
progress
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
The crossed out wheelie bin symbol means
that this product shall not be disposed of
with normal household waste. Electronic
and Electrical Equipment not included in
the selective sorting process are potentially
dangerous for the environment and human
health due to the presence of hazardous
substances. Please dispose of responsibly
at an approved waste or recycling facility.
EN
9