Télécharger Imprimer la page

Pelgrim PKD28102 Mode D'emploi page 43

Masquer les pouces Voir aussi pour PKD28102:

Publicité

Les langues disponibles

Les langues disponibles

FAULTS
Symptom
Appliance makes a noise.
The LED lighting does not
work.
Note
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
Possible cause
Incorrect positioning of food in
the refrigerator (or freezer).
There is an object against the
appliance.
The appliance is cooled by a refrigeration system with a
compressor (and with some models, also a fan) that makes
a noise. The noise level depends on the installation of the
appliance, its correct use and its age.
When you connect the appliance to the power supply the
noise made by the compressor or flowing refrigerant may be
slightly louder. This is not indicative of a defect, and has no
effect on the service life of the appliance. The appliance will
make less noise after a while.
The appliance may be temporarily noisier after the door has
been opened for too long or too frequently, a large quantity
of fresh food has been put in the appliance or the intensive
cooling function has been activated.
LED lamp faulty.
The device has just been
switched on and it takes
about 1 minute for the lighting
to come on.
Solution
Place foods in the proper
manner in the refrigerator or
freezer.
Remove the object.
Consult a service technician
about LED lighting that is not
working. For safety reasons,
you are not allowed to repair
LED lighting yourself.
This product contains a light
source of energy efficiency
class F.
EN 21

Publicité

loading

Ce manuel est également adapté pour:

Pkd28088Pkd28122Pkd28088/p01Pkd28102/p01