OPERATING THE APPLIANCE
Switching off the appliance
1. First set the temperature to setting 2 °C.
2. Then push and hold the On/Off button for 5 seconds.
All lights flash three times, an audio signal sounds three times and the lighting goes off; the
appliance is now switched off (standby).
If the On/Off button is pushed again or pushed too short, all lights will flash three times to
indicate that the appliance is in standby.
Open door alarm
If the door is left open for more than 2 minutes, the interior light will flash.
Drawer with manual humidity control
The drawer at the bottom of the refrigerator compartment does have an integrated humidity
regulator which allows regulating the humidity level. This prevents the food from drying out.
If you observe dropslets of water on the glass shelf, open the vent and wipe the shelf.
EN 16
•
Slider posotion to the right: close the vent to increase the humidity
in the drawer.
•
Slider position to the left: open the vent to reduce the humidity in
the drawer.