Publicité
Les langues disponibles
Les langues disponibles
Blade size
12 CUTTING CAPACITY
Worktable tilting
angle
90°
45°
90°
90°
45°
45°
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION!
over 85 dB(A).
14 STORAGE
▪
Thoroughly clean the whole machine and its accessories.
▪
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪
Don't keep it in plastic bags to avoid humidity build-up.
15 TROUBLE SHOOTING
PROBLEM
Motor does not run.
Vibrations are too
strong.
Copyright © 2022 VARO
POWX075740DB
Head tilting angle
90°
90°
45°
45°
45°
45°
Wear
hearing
POSSIBLE CAUSE
No electricity arrives at the
machine.
The motor is overloaded or
overheated.
Screws or parts are loose.
The mitre saw is not correctly
mounted.
Work piece is not properly
supported.
P a g e
254 mm x 30 mm x 3.0mm
Height x width (mm)
90 x 310 mm
90 x 215 mm
38 x 310 mm (left)
38 x 310 mm (right)
38 x 215 mm (left)
38 x 215 mm (right)
95 dB(A)
108 dB(A)
protection
when
SOLUTION
Check the power supply and the
power line.
Allow the machine to run idle for
about 2 minutes to cool down.
Tighten all screws.
Mount the mitre saw correctly.
Secure the work piece.
| 11
sound
pressure
www.varo.com
EN
is
Publicité
