Haier LT22R3CW Manuel D'utilisation page 16

Getting Started
B
Press button to select Tuning menu, press
button to enter.
C
Press button to select Digital Manual Search
item, press button to enter.
D
Press button to select the Channel.
Press OK button to start searching.
E
Once a channel is located, you can press
to save it.
Press EXIT button to exit.
Analog Manual Search
Follow the below steps when you need to have a manual
search.
A
Press MENU button.
B
Press button to select Tuning menu, press
button to enter.
C
Press button to select Analog Manual Search
item, press button to enter.
EN-15 Digital LCD / LED LCD Television Instruction Manual
All manuals and user guides at all-guides.com
OK button
D
Press button to select Search item, press
button is used to select the higher frequency
channel.
Press button is used to select the lower frequency
channel.
E
And then select Storage To, press
select the position number you want the channel
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
Sound System
Press button to select "Sound System", then
press button to select the correct sound system.
Current CH
Press button to select the channel number to
edit.
Storage To
Press button to select the program number you
want to storage to.
Fine tune
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
A
A-C, then press
Repeat above steps
select the Fine Tune item.
B
Press button repeatedly to carry out fine
tune, till the best picture and sound are obtained,
then loosen the button.
Channel Edit
Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
A
Press MENU button.
button to
button to