Publicité
Les langues disponibles
Les langues disponibles
BASIC OPERATION
FRONT / REAR PANEL DESCRIPTION
5
1. LCD module display
LCD shows all the UPS information with icons and messages.
2. Power On Indicator
This LED is illuminated when the utility condition is normal and the UPS outlets are providing
power, free of surges and spikes.
3. Power Switch
Master on/off switch for equipment connected to the battery power supplied outlets.
4. LCD function selected switch
The switch can be used to select the LCD display contents including input/output voltage and
estimated run time, etc.
5. Battery and Surge Protected Outlets
The unit has four battery powered/surge suppression outlets for connected equipment to
ensure temporary uninterrupted operation of your equipment during a power failure. (DO NOT
plug a laser printer, paper shredder, copier, space heater, vacuum cleaner, sump pump or
other large electrical devices into the "Battery and Surge Protected Outlets". The power
demands of these devices may overload and damage the unit.)
6. Full-Time Surge Protection Outlets
The unit has two surge suppression outlets.
7. Communication Protection Ports RJ45
Communication protection ports, bi-directional, will protect a 10/100/1000 Ethernet
connection.
8. USB Port to PC
This port allows connection and communication from the USB port on the computer to the
UPS unit.
9. Dry contact
This port produces information for equipment that can read dry contact signals.
COPYRIGHT © 2023 UltraTech
3
1
2
4
6
7
8
9
10
11 12
4
Publicité
