URBANGLIDE PO2725 Notice Originale page 25

To be able to pull on the
folding handle, the safety must
be removed by pulling on the
loop located on the right.
Adjust the size of your handlebars by
loosening the clamping buckle located on
the stem. Be careful not to exceed the
height limit indicated. Check that your
handlebars are stable and that the clamp
is tight.
Assembly steps
Then pull the folding handle to unfold your scooter.
Straighten the stem, and raise the handlebars up. Once
you have straightened to the maximum, return the
folding handle to its original position.
To fold your scooter, pull the
safety buckle.
Then pull the folding handle and lower the
stem to your scooter deck. Once lowered to
the maximum, return the safety buckle to its
original position.
25
Then return the safety buckle
to its original position, and
make sure that your
handlebars are stable.