Danfoss TP5000 Instructions D'installation page 13

Frost Protection
A constant low temperature between 5°C-30°C can be selected whilst
away from home.
o Press s and t together twice.
o Use s or t buttons to set the
desired low temperature.
- At 5°C a snowflake symbol appears
indicating frost protection mode.
- At all other temperatures an
s arrow appears, indicating a
constant temperature selection.
To return to automatic programming press s and t
o
together again.
Battery Replacement
When batteries are low a battery symbol will
flash in the LCD display. You have 15 days to
replace the battery before the unit switches
off.
When changing batteries, remove old batteries and insert new ones
within one minute and programming will not be lost.
IMPORTANT: always use high quality alkaline batteries
!
NB. If the display ever goes blank during normal operation, the
batteries will need to be renewed, the unit reset and the time and
programmes reset.
x 2
:
°
5
*
:
° s
16
03 57
16
GB
13