Danfoss TP5000 Instructions D'installation page 12

Running your programme
GB
Press PROG – the colon in the LCD display
will start to flash. The heating will now come
on and go off at the programmed times.
User Overrides
Sometimes you may need to change the way you use your heating
temporarily, i.e.due to unusually cold weather. The TP5000 has several
user overrides, which can be selected without affecting the thermostat
programming.
Altering display to show either time or actual room
temperature
o Press + and – together to change
between settings.
To temporarily alter the current programmed
temperature
o Press s or t until required temperature is
displayed.
This override will automatically cancel at beginning of
next programmed event)
To temporarily use your weekend programme during
the week
o Press s and t together once.
This override cancels at 2:00am.
12
(i.e. you have a days holiday or are off sick)
i2 24
20