Description Of Symbols; Correct Usage - Michelin MOP 300 Notice D'utilisation

1.4. Description of symbols

Pay attention to all the signs and symbols shown in these instructions and on
your tool.
Make a note of these signs and symbols.
Important.
Read the instructions for use
before starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, protective
strong gloves.

2. CORRECT USAGE

a) This tool is designed to be used as a polisher. Read all the
warnings, instructions, indications provided on drawings and
specifications supplied with this tool. Failure to comply with all the
instructions provided below may cause electrical shocks, fire and/or serious
injuries.
b) This tool is not intended to be used for smoothing, metal
brushing and cutting operations. The use of this tool for unintended
applications may cause hazards and injuries to people.
c) The tool must be used with accessories that have been specifically
designed or recommended by the manufacturer. The fixing of the
accessory to the tool does not guarantee a safe operation.
3. STARTING UP
Voltage and power frequency must match the data displayed on the
identification plate. Make sure that tool is switched off before plug is
connected.
8
Always use breathing
apparatus when working with
materials which generate
dust.
End of life machines contain
valuable materials and
therefore they should not
be placed in household
waste. We would ask you to
play your part in protecting
resources and help protect the
environment by returning this
machine to a recycling point
(if one is available) when it
reaches the end of its life.