Michelin MOP 300 Notice D'utilisation page 11

12. MAINTENANCE
All maintenance operations are carried out with the power supply
disconnected.
At the end of each work session, or when required, remove any dust from the
body of the tool using a jet of compressed air, paying particular attention to
the motor ventilation slots.
No other maintenance operations must be undertaken by the user.
Maintenance and cleaning of the inner parts, like brushes, ball bearings,
gears etc. or others, must be carried out only by an authorized customer-
service workshop.
13. DISPOSAL (WEEE DIRECTIVE)
At the end of its useful life, the product, pursuant to European Directive
2002/96/CE (WEEE) + 2003/108/CE and its implementation in national law,
must not be released into the environment or thrown away as domestic
waste, but must be disposed of at authorised recycling centres (contact
the relevant local authorities for a list of places where the product may
be disposed of according to the law). Disposing of the product correctly
contributes to protecting human health and safeguarding the environment.
Any illegitimate disposal of the product will be punishable by law.
11