Technical Specifications; Noise Emission Values - Michelin MOP 300 Notice D'utilisation

9. TECHNICAL SPECIFICATIONS

Mains voltage:
Mains frequency:
Power rating:
BACKING PAD:
R.P.M.:
INSULATION CLASS:
The values shown are based on a nominal voltage of 230-240V/50Hz. In the
case of voltages and frequencies of different power values may vary. Refer to
the label technical specifications to the nominal values of the tool.

10. NOISE EMISSION VALUES

Detected noise emission values comply with the following directives:
EN 62841-1
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY
Use ear protection!
11. VIBRATION EMISSION VALUES
Detected vibration emission values comply with the following directives:
EN 62841-1
3 AXIS VIBRATION LEVEL
UNCERTAINTY
Displayed emission values are comparative and are to be employed for a
provisional assessment of the operator's risk exposure during the work period.
Appropriate evaluation of work period must also include tool's idle and
stop periods. These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories, or if it does
not undergo regular maintenance, emission values can significantly increase
during operations.
Danger! The indicate measurements refer to new power tools. Daily use
causes the noise and vibration values to change.
10
230-240 V~
50 Hz
300 W
Ø 75 mm
3500-6400 rpm
II/
85.5 dB(A)
96.5 dB(A)
k=3 dB(A)
2
3.675 m/s
2
k=1.5 m/s