ResMed Ultra Mirage Guide Clinique page 9

r M
easseMbliNg the
1
Insert the ports cap into the ports. Make sure the
tabs of the ports cap face away from the mask.
Elbow
2
Insert the elbow into the mask frame and secure
it with the elbow clip on the inside of the frame.
The flat side of the elbow clip must face the mask
frame. If you have fitted the elbow correctly, it
should not move when you try to firmly pull it
away from the frame.
3 Replace the forehead pads by sliding the centre
division of the pads onto the forehead pad
holders.
ask
Elbow
clip
Forehead
pad
4
Reconnect the forehead support to the mask
frame. Depress the tab and move the forehead
support into one of the four slot positions.
Forehead
support
7