en-us Operating the Dishwasher
Child Lock (panel lock)*
The child lock will lock the panel
while the dishwasher is in operation
to prevent that a wash cycle is
interrupted unintenionally (e.g. by
children).
To set the panel lock:
Start the desired wash cycle.
1.
Hold down the button that says
2.
'Child Lock' underneath it for
approximately 3 seconds until the
display reads '–.
The panel lock is active.
'– will be indicated now if any button
is pressed and the program will not
be reset.
To deactivate the panel lock hold
down the button that says 'Child
Lock' underneath it for approximately
3 seconds until the display no longer
reads '–.
The panel lock is deactivated
automatically when the wash cycle is
completed. In case of a power
outage the panel lock will remain
active. The panel lock has to be
activated with each new wash cycle.
* optional feature which may or may
not be included with your
dishwasher.
34
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!)
This feature has two settings:
š:‹‹ Off
š:‹‚ On
Press the On/Off button (.
1.
Hold down function key # and
2.
press Start button P until the
display 8 indicates š:x (x can
be any number).
Release both buttons.
3.
Press function key # until the
4.
display 8 indicates the factory
set value š:‹‹.
Press function key 3 to switch
5.
the intensive drying feature on
š:‹‚ or off š:‹‹.
Press Start button P to save
6.
setting.