Publicité
Les langues disponibles
Les langues disponibles
7. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
Refit the bracket holding the bottom hinge
pin. Replace both adjustable feet. Transfer
the lower door to the proper position. Secure
the level of the door, put the bottom hinge
pin into the lower hole of the door, then
tighten the bolts.
8. Allow the middle hinge to reverse the
direction 180 degrees, then transfer it to the
left position properly. Put the middle hinge
pin in the upper hole of the lower door, then
tighten the bolts. Transfer the upper door to
the proper position. Secure the level of the
door; put the middle hinge pin into the lower
hole of the upper door.
9.Replace the lid by fitting the upper hinge
core into the upper door's hole, securing it
with the 4 screws.Replace the screw covers.
10
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the main outlet.
When you reverse the door,
please do the following :
1. Move the accessory
cover of the upper door and attach
accessory
A
that is a small detachable part
from a small bag.
A
2. Remove the screw(1) that hold the door
stopper(3),then remove the door stopper(3).
3. Insert the door stopper(2),then tighten the
screw(1).
3
B
from the upper
B
2
1
Publicité
