LIMIT LIDD265 Manuel D'instructions page 10

Reversing the door
The side in which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
3. Putty knife or thin-blade screwdriver
1. Stand the refrigerator, use a flat-bladed
screw driver to remove the 4 screw covers at
the rear of the refrigerator lid.
2. Unscrew and lift the lid from the rear and
remove it, then lift the upper door and place
it on a padded surface to prevent it
becoming scratched.
9
3. Remove the upper hinge core, transfer it
to left side and tighten securely, then put it in
a safe place.
allows for it.
4. Remove the two flange screws, then
remove the middle hinge that holds the
lower door in place. Lift the lower door and
place it on a padded surface to prevent
scratching it.
5. Remove the hinge hole cover from the
holes as illustrated and transfer them to the
uncovered hole on the
from
6. Remove both adjustable feet and
bottom hinge bracket by unscrewing the
bolts.
left
right side.
the