tibelec 976230 Notice D'utilisation page 11

in order to avoid any risk.
• Before turning on the device each time, check that the device and the cables
are not damaged.
• If it is likely that hazard-free use is not possible, the device is to be switched
off and protected against any involuntary use. Hazard-free use is only possible if:
- the device or measurement cables are visibly damaged,
- the device is no longer working,
- after it has been stored for a long time in less than ideal conditions,
- after the device has been transported under less than ideal conditions.
• Do not use or store the device in an environment at high temperatures, in
humid, explosive or flammable environments, or one with high electro
magnetic fields. This could reduce the device's efficacy.
• In order to prevent damage to the testing device and prevent risks causing
possible accidents, the multimeter's internal circuit must not, under any
circumstances, be modified.
• LCD display, max 1999-digit reading
• Function switch : Voltmeter AC, Battery test 9V max, Ammeter DC,
Continuity with buzzer, Diode test, Ohmmeter, Voltmeter DC.
1
2
1. LCD display
2. On/off switch
3
3. Function switch
4. Shock absorbing shell
5. Jack VΩmA red test leads
6. Jack COM black test leads
4
5
6
11