Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND CARE
1.
CAUTION: Always unplug the appliance from the mains
power supply and let it cool down before cleaning.
2. Wipe the outside of the heater and remote control with a soft,
damp cloth and dry thoroughly. Do not let any liquid enter the
heater or the remote control.
3. Remove the air inlet filter by lifting up the tabs at the bottom
of the filter and pulling it away from the appliance. Clean
under running water. Dry thoroughly before reassembling the
appliance.
NOTE:
•
Do not use solvents, chemical or abrasive cleaning agents, wire
brushes, sharp objects or scouring pads to clean the product.
•
Never immerse the appliance in water.
•
Always clean the appliance before storing it for a long time.
•
If you are not using the appliance for a long period, store
the appliance in its original packaging or in a dust-free, dry
environment.
TROUBLESHOOTING
Problem
The appliance
will not turn on.
Possible Cause
•
The plug is loose
or not connected.
•
Check the fuse
for the main
electricity supply
has not blown.
Solution
•
Check the power
cord and make sure it
is firmly connected to
the mains socket.
•
Replace the fuse. If
it is still not working,
try plugging in
to another mains
socket. If the
problem persists,
take the appliance
to a nearby service
center.
EN
15
Publicité
