Frigidaire FFMV1846VD Instructions D'installation page 23

Reinstall the vent by sliding the bottom of the
vent into place. Push the vent top into position
and slide right into place. Replace the two vent
mounting screws located on top of the microwave
using a #1 Phillips screwdriver.
C lose the microwave door. Plug in microwave
oven or reconnect power.
IMPORTANT: Remove the cardhoard spacers between
heat shield and door.
Installation Instructions
EN-2 3
For models with the recirculation filter access door
follow these steps to replace or install a PureAir
Microwave F ilter.
1
Remove the PureAir
and shake filter to remove excess carbon.
2
Use a Phillips head screwdriver to unscrew the
®
PureAir Filter access door.
3
Open the filter access door.
4
Remove the existing PureAir
by pulling forward out from the unit.
®
®
Filter from the packaging
Quick Start
®
Filter(if installed)
,