Publicité
Les langues disponibles
Les langues disponibles
8
X on the hole template (the screws
and expansion plugs must be suit-
able for the type of wall).
•
Take the upper part of the structure
B (Fig. 5) and insert the 3 slots onto
the 3 screws that are not completely
tightened. Rotate slightly to fit (Fig.
5).
•
Drive in the fourth screw X and
tighten the remaining 3 to allow de-
finitive blocking of the upper part of
structure B.
•
Take the lower part of the telescopic
structure C and insert it into the up-
per structure B (Fig. 6).
10
9
- 15 -
Publicité
