Avanti SLTW44D0W Manuel D'instructions page 16

Note:
 Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
If you want to change a selected program, press the POWER button first to turn the unit off, then

press the POWER button again to turn the unit back on, then press the Program button to select
the new cycle before pushing START/PAUSE button.
When the Rinse and Spin functions are ON, do not use detergent.

If you want to drain the water during washing, press the POWER button first to turn the unit off,

then press the POWER button again to turn the unit back on, then select the SPIN function. Press
START/PAUSE button again to restart.
ADDING / REMOVING CLOTHING AFTER THE CYCLE HAS STARTED
Your washing machine is equipped with a safety system that will lock the top lid during a wash
cycle or will prevent a wash cycle to start if the lid is not closed.
THE MACHINE WILL NOT OPERATE WITH THE TOP LID OPEN, CLOSE THE LID AND PRESS
THE START / PAUSE BUTTON.
To add or remove clothing to/from a wash cycle follow the steps below:

Press the Start / Pause button to pause the wash cycle, wait for the machine to stop
and the lid lock to release.

Open the lid and place the additional items to be washed, close the lid and press the
Start / Pause button to resume the wash cycle.
DELAY START (PRESET) SETTING
Select this option when you would like to load the washer but not run the wash cycle until a later time.
Note:
As washing machines and other appliances are considered to present a potential child entrapment
danger; you should never run a wash cycle when you are not present for either the entire or major
portion of the cycle.
Press down the power button.

Load the washing machine and select the appropriate wash program.

 Press DELAY button continuously to select the delay start time. (From 1 hour to 48 hours)
 Close the lid completely.
 Press START/PAUSE button to start the course.
CONTROL PANEL - CHILD SAFETY LOCK
If you have small children, it is recommended that you activate this setting every time you use the
washing machine as children can be attracted to and enticed to play with the washing machine.
Select the desired washing program as described previously in this manual

Select the appropriate program and press START/PAUSE button to start the washing machine.

Press and hold both the TEMP and WATER LEVEL buttons until you hear a "BEEP" sound

(approximately 3 seconds) and the CONTROL LOCK indicator is illuminated.
 The "Control Lock" indicator and remaining wash time will display.
While the control lock is activated the only buttons that will function will be the Power ON/OFF and

the buttons to de-activate the control lock function.
To de-activate the child lock function simply press and hold the TEMP and Water Level buttons

again.
16