Télécharger Imprimer la page

Drive DeVilbiss Healthcare DH 135 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• The product should not be exposed to temperatures
above 60 °C for long periods of time (for example, use
in a sauna, etc.).
• Take note of the permitted maximum weight of the user.
This information can be found in the technical data in
these instructions for use as well as on the identifica-
tion plate.
• Every serious incident which occurs in connection with
the product must be reported to the manufacturer and
the competent authority of the member state in which
the user and/or patient is located.
Assembly
The shower chair is preassembled; only the back rest
needs to be clicked into place and the 4 adjustable feet
need to be assembled (pic. 1-2).
1
Technical data
Product
Article number
Overall width
Overall height
Overall depth
Seat width
Seat depth
Seat height
Total weight
Load max.
Frame material
Material Seat section
and Backrest
Drive Medical GmbH & Co. KG | As per: 25.08.2023 | Errors and alterations excepted
2
DH 135 without backrest
550800100
43 cm
43 - 53 cm
47 cm
41 cm
36 cm
43 - 53 cm
2,2 kg
135 kg
Welded steel tubing, powder-coated
High-density polyethylene
Height adjustment of the feet
Before using the product, ad-
just it to the desired height
(pic. 3). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
DH 135 with backrest
Welded steel tubing, powder-coated
High-density polyethylene
EN
550800200
43 cm
72 - 82 cm
61 cm
41 cm
36 cm
43 - 53 cm
3 kg
135 kg
9
Instructions for use DH 135

Publicité

loading