About the controls on the refrigerator.
The controls will look like one of the following:
Locking the Controls
(on some models)
This feature allows you to lock the controls so the settings
cannot be changed.
To lock the controls:
Set the controls to the desired settings.
Press and hold the lock pad for 3 seconds.
When the controls are locked, the indicator light will come
on and the control settings will not be displayed.
To unlock the controls:
Press and hold the lock pad for 3 seconds.
After unlocking the controls, the settings will be displayed,
the lock indicator light will go out and the settings can be
changed.
4
Initially, set the refrigerator control at 5 and the freezer control at 5 and
allow 12 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one increment
at a time, and allow 12 hours after each adjustment for the refrigerator to
reach the temperature you have set.
Setting either or both controls to 0 stops cooling in both the refrigerator
and freezer compartments but does not shut off electrical power to the
refrigerator.
Touch pad controls
• Setting either control at 0 will automatically set the other control at 0.
The zeros will blink until you set the controls.
• If both controls are set at 0 and either COLDER pad is pressed, the
controls will automatically reset to 5.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
Ambient Room Temperature Limits
This refrigerator is designed to operate in ambient
temperatures specified by its Temperature Class which is
marked on the rating plate.
Temperature
Class
Extended-
Temperate
Temperate
Subtropical
Tropical
NOTE: Internal temperature may be affected by such factors as the location
of the refrigerator, ambient temperature and frequency of door openings. Adjust
temperature controls as required to compensate for these factors.
Symbol
Ambient Temperature
Maximum
SN
32°C
N
32°C
ST
38°C
T
43°C
Minimum
10°C
16°C
16°C
16°C