Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
1.
Turn the heater ON by pressing remote control the ON/OFF button ,the unit will blow the
cold air and "
2.
Pressing the "MODE" button on remote control ,the unit will blow the warm air and
both"
"and"
Pressing the "MODE" button second times on remote control,the unit will blow the hot air and
both "
""
" lights are on.
3.
Pressing the "MODE" button Three times on remote control,the unit will blow the cold air
and "Fan/M" light is on.
4.
Pressing the "
down.Pressing again will be closed swing function.
PS:For smart operate,customer only press the one start button near about master
button,the heater will working with hot air and both "
Smart button view:
Master Button
One start Button
2) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function through by
Remote control "
2. Press "
" button ,set the timer up to 24 hours,keep press "
from 00:00--24:00(01:00=1hour,...24:=24:00 hours ect.) and the "
PS:set as "00" means no set timer ,the "
3)THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2. To adjust temperature, press the "
set from 10℃ to 49℃.
3. When the air temperature drops 2 degree below the set temperature, the heater will start
heating with "
4. When the air temperature high 1 degree or ≤ the set temperature, the heater will blow the cold
air.
" light is on.
" lights are on.
" button on the remote control ,the unit will Louver swing up and
" button .
"(2000W).
""
" light is off.
" to set the desired temperature and the temperature
""
"lights are on.
" button to increase the hours
" light is on.
22
Publicité
