GYS GYSDUST EXTRACTOR Manuel D'utilisation page 15

Operating manual
WARNING
The following indications:
1. Before use, read the instructions
2. Connect the hoover's metal ground clamp to a part of the workplace connected to the installation's ground circuit.
(The suction and circulation of dust generates static electricity).
3. Disconnect the pneumatic power supply before changing the bag.
The dust bag should avoid contact with flames or sparks.
FEATURES OF THE HOOVER
Mobile pneumatic hoover for explosive dusts deriving from sanding or similar operations, designed for connection to a
pneumatic tool.
Depression
Air flow
Air consumption
Adjustable suction pressure
Suction cable length
Suction cable diameter
Dust bag capacity (included)
Dimensions
Weight
FITTING THE DUST BAG (058880)
WARNING: during this operation, explosive atmospheres and dust deposits may be formed; avoid
introducing potential sources of ignition such as: mechanical sparks, electrical parts, hot surfaces,
flames, hot gases, electrostatic charges in the vicinity of the device. Follow the internal standards
for behaviour in the presence of potentially explosive atmospheres according to the Atex Directive
2014/34/EU.
• Check, at least at the end of the working day, that the dust bag inside the hoover is full.
• The maximum capacity of the dust bag is 7 kg and 20 l volume: do not exceed this limit!
• In the event that the removed bag shows tears, proceed with care and following the internal standards of behaviour
in the presence of explosive atmospheres in accordance with the Atex Directive 2014/34/EU.
• Do not use the same dust bag more than once and use ONLY the GYS dust bag with code 058880.
• Spare bags should be stored in a dry place.
• For disposal, act in accordance with the law and internal standards of behaviour for handling explosive dusts.
Translation of the original
instructions
Features
GYSDUST EXTRACTOR
1 150 mm H2O
600 l/min
340 l/min
5 bar max
3 m
Ø 29 mm
7 kg
350 x 800 x 400 mm
21 kg
ATEX Standard
Group II
Category 3
15