Publicité
Les langues disponibles
Les langues disponibles
RELEASE OF LIABILITY:
By assembling and inflating this product, you agree that you have read and understand the entire
World of Watersports' product manual, including all instructions and warnings contained in that material prior to
using this product. You additionally agree that you will ensure any additional or subsequent users of this product
will read and understand the entire owner's manual. Misuse or improper use of this product could result in risks,
dangers and hazards which can result in serious injury or death. The risks and dangers that can be encountered
through the improper use of this product can be avoided by reading and following the warning guidelines listed
within the owner's manual and by proper use of this product. Your assembly and use of this product shall be
evidence of your agreement, to the fullest extent permitted by law, to properly follow the instructions and abide
by the warnings set forth within the product manual. Your assembly and use of this product shall also constitute
a release, to the extent permitted by law, by you and by any third party permitted by you to use, in any manner,
this product, to World of Watersports from any and all liability for any loss, damage, injury and/or expense that you
or any user of this product may suffer as a result of the use of this product. This release shall extend to any loss,
damage, injury or expense due to any cause whatsoever, including negligence or breach of contract on the part of
World of Watersports and/or any party participating in the design and/or manufacture of this product. The terms of
this release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product.
World of Watersports and related parties have not made and hereby expressly deny any oral or written
representation and/or warranty, including warranty for a particular purpose, other than what is set forth
herein and in the World of Watersports' owner's manual.
Product Name
Model#
Approximate Inflated Size
Screen House Island
21-2090 100 x 100 x 61 in 1- 6
Patent Pending
Package Contents: 1 heavy-gauge PVC bladder, 1 canopy screen house with poles, 1 anchor bag with rope,
1 product manual, 1 patch kit
The best air pumps to use to inflate your tube are the following:
1. 110V Electric Pump - E.g. WOW Sports 2.6 PSI High Pressure Air Pump
or any 110V Electric Pump with 2.5 to 3.0 PSI
2. WOW Sports Double Action Hand Pump or Foot Pump
3. WOW Sports 12V Pump - Note that most 12V pumps have a maximum air pressure of 1.0 PSI so a secondary
air pump, such as the Double Action Hand Pump or a foot pump, will need to be used to reach the necessary
air pressure for your inflatable.
4. Leaf Blower
5. Vacuum with two-way switch
1.
2.
Person
Approximate Weight Limit
1320 Ibs. 599 kg.
254 x 254 x 154 cm
2.
3.
2
ASSEMBLY INSTRUCTIONS:
1. Lay the product out on a flat surface without sharp objects that could puncture the PVC bladder island base.
Find the valve and inflate the screen house island base until firm.
2. Close and secure all valves completely.
3. Take the screenhouse canopy out of its packaging and unfold the mesh onto the
flat surface so that it is upside down.
4. Put all the canopy poles together. They are separated into fourths but all sections are connected by a
string making them easy to put together.
5. Insert the canopy poles into the canopy sleeves on each corner. Push canopy poles through the canopy sleeve
until the pole reaches the other side.
6. Note please use 2 people when setting up the canopy. Insert the ends of the canopy poles into the grommet
pole holders found on the side gusset of the inflatable island base. Now go to the opposite side and insert the
canopy poles into the grommet pole holder. Work your way around the item until all canopy poles are inserted
into all grommet pole holders. Now your screen house canopy should be up and taking shape.
7. Pull down on the mesh and fit the canopy properly. Then go inside the canopy and secure the inner middle area
with the straps provided.
8. To finish securing and tightening your screen house canopy find the secure straps and tie them to the
lower grommet hook located under each pole holder.
9. Locate your anchor rope and anchor bag and prepare to use to make the island stay in one place when in use.
mesh screen house canopy
cup holder
grommet pole holder
PROPER INFLATION:
Proper inflation is the key to optimum performance and durability of this product.
While in use, the cover should be taught with few wrinkles. If your product has no cover and is constructed out
of PVC material only inflate until firm. Once inflated you should test whether there is enough air in the product by
having an adult stand on top of the product. If the product is properly inflated, then the adult will barely sink into
the product while standing on top of it. If the product is under inflated damage can occur to the product while in
use and the warranty will be voided. It is important to monitor the amount of air in the product once the item is in
use. Continue to make sure that the product is properly inflated. When not in use, be sure to remove some air from the
product and put in a shaded area. If you leave a full product sitting in the sun it will cause the air inside to expand, causing
serious damage to the seams and I-beams of the product. Check and adjust inflation levels each time you use the product.
MAINTENANCE:
• Clean your product using soap and water or mild detergent.
• Never use strong cleaning agents.
• When clean and dry, the product should be deflated and stored in a cool, dry area out of direct sunlight.
• To deflate, simply unfasten the entire valve from the base. Note to unfasten all valves if you have
multiple valves on your product.
• Avoid storing this product in areas of extreme temperatures and please take precautions against animals
and rodents.
canopy sleeve
lower tie off grommet
inflation valve
3
Publicité
