Livarno Living 323685 1901 Notice De Montage page 8

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (fig. A)
2 x foot (1)
2 x gas spring (2)
2 x leg (3)
height adjustment lever (3a)
2 x seat (4)
8 x screw, M6 x 16mm (5)
8 x washer, M6 x 18mm (6)
1 x Allen key (7)
1 x assembly instructions
Technical data
Dimensions: approx.
43 x 76–84 x 50cm (W x H x D)
Maximum load: 110kg each
110
Date of manufacture (month/year):
06/2019
Intended use
The product is designed to serve as indoor
seating. The product is not intended for commer-
cial use.
Safety information
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion.
10 GB/IE
Risk of injury!
• Make sure the product is properly stabilised
before use.
• Place the product on a level surface.
• The product may only be used under adult
supervision and should not be used as a toy.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the product or
lean against it. The product can tip over.
• Check the product for damage or wear before
each use. The product should only be used if it
is in perfect condition!
• Ensure that the product has been assembled
properly and in accordance with these assem-
bly instructions. Improper assembly can lead
to injuries and impair the product's safety and
functionality.
• The gas spring may only be replaced or
repaired by a trained professional.
• Never stand on the product.
Assembly
1. Assemble both products as shown in
figs. B–D.
Note: Make sure that the leg (3) is correctly
aligned using the height adjustment lever (3a)
(fig. C). The arrow marking on the leg must point
toward the outer edge of the seat.
2. Place the product on a level surface (fig. E).
Setting the seat height (fig. E)
Raising the seat height
Stand next to the product and pull up the height
adjustment lever (3a) with one hand without
putting any weight on the seat.
Lowering the seat height
Sit on the product and pull up the height adjust-
ment lever (3a) with one hand.