LG LB56 Serie Manuel Du Propriétaire page 29

y To use the SIMPLINK function, you need to
use a high-speed HDMI
(Consumer Electronics Control) feature
added). High-speed HDMI
the No. 13 pin connected for information
exchange between devices.
y If you switch to another input, the SIMPLINK
device will stop.
y If a third-party device with the HDMI-CEC
function is also used, the SIMPLINK device
may not work normally.
y [Depending on model]
If you select or play media from a the
device with a home theatre function, the
HT Speaker(Speaker) is automatically
connected.
Be sure to connect with an optical cable (sold
separately) to use the HT Speaker(Speaker)
function.
SIMPLINK function description
y Direct Play : Plays the multimedia device on
the TV instantly.
y Select multimedia device : Selects the
desired device via the SIMPLINK menu to
control it from the TV screen instantly.
y Disc playback : Manages the multimedia
device with the TV remote control.
y Power off all devices : When you power off
the TV, all connected devices are turned off.
y Sync Power on : When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, the TV will automatically turn
on.
y Speaker : [Depending on model]
Select speaker either on the home theatre
unit or the TV.
To set password
®
cable (with CEC
SETTINGS LOCK Set Password
®
cables have
Sets or changes the TV password.
The initial password is set to '0000'.
To return Factory Reset
SETTINGS  OPTION Factory Reset
All stored information is deleted and TV settings
are reset.
The TV turns itself off and back on, and all
settings are reset.
y When Lock System is in place, a pop-up
y Do not turn off the power during initialization.
To remove the USB device
Q.MENU USB Device
Select a USB storage device that you want to
remove.
When you see a message that the USB device
has been removed, separate the device from the
TV.
y Once a USB device has been selected for
Using a USB storage device - warning
y If the USB storage device has a built-in auto
y Some USB storage devices may not work or
y Use only USB storage devices formatted
SETTINGS
window appears and asks for password
removal, it can no longer be read. Remove
the USB storage device and then re-connect
it.
recognition program or uses its own driver, it
may not work.
may work incorrectly.
with the Windows FAT32 or NTFS File
System.
27