FLORABEST 297505 Notice D'utilisation page 8

Congratulations!
With your purchase you have decided on a high-
quality product. Get to know the product before
you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only for
the given areas of application. Keep these instruc-
tions safe. When passing the product on to a third
party, always make sure that the documentation
is included.
Package Contents (Fig. A)
2 x frame (1)
2 x worktop, wood (2)
1 x worktop, galvanised (3)
2 x intermediate element (4)
2 x hook rail (5)
12 x screw M6 x 65mm (6)
8 x screw M4 x 30mm (7)
4 x screw M3 x 15mm (8)
12 x nut M6 (9)
1 x instructions for use
Technical Data
Maximum load: 10kg per
worktop
Potting table dimensions:
approx. 76 x 37 x 92cm (W x D x H)
Date of manufacture (month/year)
02/2018
Intended use
The item is not intended for commercial use. The
item is intended for indoor and outdoor use.
The item serves as a work surface for repotting
flowers or plants. The hook rails are used to hang
up tools for instance.
10 GB/IE
Safety Instructions
Danger!
• Never leave children unattended with packing
materials. There is a
risk of suffocation.
Risk of injury!
• Ensure the item is properly stabilised before
using it.
• Place the item on a level surface.
• The item may only be used with adult supervi-
sion, and should not be used as a toy.
• This item is neither a toy, nor a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the item or lean
against it. The item can fall over.
• Check the item for damage or wear before
each use.
Check regularly to make sure all bolted con-
nections are tight!
• Never stand or sit on the item.
• Caution! There is a risk of tipping over if work
items protrude.
• There is a high risk of injury if the item is assem-
bled incorrectly.
• There is a high risk of injury if the item is used
incorrectly.
Assembly
The item should be assembled by two
people.
To assemble the item you need a Phillips screw-
driver (not included in the package contents).
1 Assemble the frame and the wooden worktops
(2) on a flat surface, as shown in figure B.
2. Then assemble the galvanised worktop (3) as
shown in figure C, and attach the hook rails
(5) to either side of the potting table.
Storage, cleaning
Always store the product in clean and dry condi-
tion at room temperature. Only use water to clean
and wipe it dry with cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.