Publicité
Les langues disponibles
Les langues disponibles
Required dimensions for Installation
importAnt note to instAller
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation Flow chart
Select a location
Confirm
you have
followed all
the previous
steps fully.
Yes
step 1 Selecting a Location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as a furnace, water heater, etc.
• Has enough space so that the washer doesn't rest on its power cord.
WA3000J_WA40J3000AW_USER MANUAL_DC68-03520A-10.indd 13
43.9 in.
(111.7 cm)
39.3 in.
(99.8 cm)
27.0 in.
(68.6 cm)
58.1 in.
(147.6 cm)
*required spacing
Connect the water and the drain
Power on your washing machine
Does
your washer
have excess vibration
No
or noise?
English - 13
29.3 in.
(74.4 cm)
(7.6 cm)
48 in.² *
(310 cm²)
24 in.² *
(155 cm²)
(7.6 cm)
Closet or Door
Adjust the levelling feet
[run a test cycle]
Run a test cycle (Rinse+Spin) with small
amount of laundary
(about 4~5 Towels)
Finish the
installation
43.9 in.
(111.7 cm)
3 in.
3 in.
2016/6/27 19:11:13
Publicité
