ProScan PDVD7049 Mode D'emploi page 9

FUNCTION OF CONTROL BUTTONS
LCD ON/OFF
Press to turn on or off the LCD display.
POWER
In power on mode, press to turn the unit to
standby mode. Press again to turn on from
standby mode. (For saving battery power, always
turn off the unit by slide the Power ON/OFF
switch to OFF position.)
Note: The disc player will turn to standby mode
automatically when screen saver mode come on
for approximately five (5) minutes.
VOL ( VOLUME +/– )
Press to increase or decrease volume.
MUTE
Press to turn off the sound temporary.
Press again to turn it back.
GOTO
In DVD playback mode, press the GOTO
button, the TT (Title), CH (Chapter) and
establish time selection menu will pop up on the
screen. Using the Direction & Numeric buttons
to select the desired title, chapter or time then
press the ENTER/OK button to start to play from
the selected Title, Chapter or establish time.
In CD playback mode, press the GOTO button,
the TRK (Track) and establish time (for
selected track) selection menu will pop up on
the screen. Using the Direction & Numeric
buttons to select the desired track or establish
time (for selected track) then press the ENTER/
OK button to start to play from the selected
track or establish time.
OSD (On Screen Display)
During playback, press the OSD button
repeatedly to read the information of playback
status.
TITLE
Press to return to disc's title page (Function
depends on the recording of the DVD disc).
SUBTITLE
During DVD playback, press repeatedly to select
the desired subtitle (Function depends on the
recording of the DVD disc).
STEP
During movie playback, press STEP button
repeatedly to play the movie frame by frame.
Press the Play/Pause button to resume
normal playback.
MENU
Press to return to disc's menu page (Function
depends on the recording of the DVD disc).
ANGLE
During DVD playback, press repeatedly to
select the viewing angle (Function depends on
the recording of the DVD disc).
ZOOM
During movies playback, press the ZOOM
button repeatedly to zoom in/out the picture. In
zoom in mode, press the Direction buttons to
select the parts of the zoomed picture to watch.
This function is not available on all discs.
N/P
Press to set the TV system to NTSC/PAL or
AUTO to match the connected TV.
AUDIO
During DVD playback, press repeatedly to
select the desired language or sound track.
(Function depends on the recording of the DVD
disc).
A-B Repeat
During Playback, press the A-B button to
define where you want the section to start.
Press A-B button again to define where you
would like the section to end, the unit will then
play the selected section repeatedly and
continuously. Press the A-B button again to
resume normal playback. (This function is not
available on all discs).
SLOW
During playback, press the SLOW button
repeatedly to set the slow motion speed. Press
the Play/Pause button to resume normal
playback.
9