ProScan PDVD7049 Mode D'emploi page 16

SYSTEM SETUP:
Press the SETUP button once. The SYSTEM SETUP menu will appear on the screen as below:
Press the Direction ► button to enter to the menu then using the Direction ▲ or ▼ button to
select and highlight the function you need to set or reset:
1. If TV System is selected, using the Direction and ENTER/OK buttons to set to NTSC, PAL or
AUTO . (Note: The TV system in US, Canada and Mexico is NTSC).
2. If POWER RESUME is selected, using the Direction and ENTER/OK buttons to set it to On or
Off. If set to On, the unit will start playback from the position where the disc was stopped last
time.
3. If Screen Saver is selected, using the Direction and ENTER/OK buttons to set it to ON or OFF.
If set to On, the screen saver will come on when the unit idles or the image is paused for
approximately five
(5)
4. If TV Type is selected, using the Direction and ENTER/OK buttons to set the aspect ratio to
match the playing movie.
5. If Password is selected, the setting menu will appear on the screen as below:
 Press the Direction ► button to select and highlight "
 Enter the password by press the numeric buttons. Then press the ENTER/OK to release the
lock. " " will appear on the screen. (Default password is "0000")
To change a new password, highlight the password and enter a new four digit password
under unlocking status, press ENTER/OK button to confirm the password changing.
SYSTEM SETUP
SYSTEM SETUP
TV System
POWER RESUME
TFT
Screen Saver
TV Type
Password
Rating
VOICE GUIDE
Default
minutes.
SYSTEM SETUP
TV System
POWER RESUME
TFT
Screen Saver
TV Type
Password
Rating
VOICE GUIDE
Default
16
".