Velleman CAMTVI16N Mode D'emploi page 6

7.2 Method 2
1. On the DVR live view, right-click in the screen to display the DVR
menu. Select ADVANCED CONFIG  DCCS  OSD MENU.
2. Select the camera channel and click SETUP.
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
NCRECORD
DCCS
NOTIFY
EXIT
8. Menu
Please go to www.velleman.eu to download the menu from the product's
page.
9. Cleaning and Maintenance
The camera does not need any particular maintenance. However, it is
advisable to clean it occasionally to keep it looking like new.
10. Technical Specifications
IP rating
pick-up element
number of pixels
resolution
min. illumination
IR LEDs
IR-cut filter
max. IR projection distance
S/N ratio
electronic shutter
flickerless mode
lens
lens angle
V. 02 – 08/05/2018
CAMTVI16N
ADVANCED CONFIG
CH1 CH2
OSD MENU
DCCS MENU
F.W.
DEVICE
CONNECTION
IP66
1/2.7" CMOS image sensor
1936 (H) x 1096 (V)
1080P
0.1 lux / F1.8
2
yes
25 m
> 48 dB (AGC off)
1/30 to 1/720000 sec
50 Hz/60 Hz/off
f3.6mm / F1.8
6
CH3 CH4
SETUP
SETUP
E8
AVT SERIES
OK
©Velleman nv