Thomas CENTRI 772 Mode D'emploi page 10

Maintenance and Care
• Always pull out the plug before cleaning the
appliance!
• After use, wipe the spindrum dry with a cloth.
• If dirty washing has been spun, it is necessary to rinse the drum
out with clear water in order to avoid soiling the next load of
washing.
• Clean the exterior of the spin dryer with a damp cloth and wipe it
dry.
• Use standard detergents only to clean the appliance.
• Do not use abrasive cleaning agents.
• Never use petrol or other solvent liquids.
• The spin dryer requires no other maintenance.
10
If unexpected difficulties arise
• Before contacting your dealer, check whether the fault is due to
one of the following minor causes.
The motor does not function:
• Has the fuse blown?
• Is there damage to the mains cable, plug or socket? Pull out the
plug before checking!
• Never open the motor yourself!
Water does not flow out:
• Pull out the plug! Check whether the outlet spout is blocked by a
piece of washing. Press the spin drum from the inside against
the outer casing with your hand and remove the piece of washing.
The spin dryer does not pick up spin speed:
• Please note that the spin dryer normally overcomes a certain
amount of unbalance itself when picking up spin speed. The motor
and spin drum are suspended flexibly for that reason.
• However, if the unbalance is too great (brought about by incorrect
loading of the spin dryer), the machine cannot pick up spin speed.
The spin dryer "jumps":
1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack the washing
evenly.
3. Reload the spin dryer in accordance with the instructions given on
the previous page.